SPTA 5inch 125mm Forced Rotation Dual Action polisher Professinal Car Buffing Polisher Set with Polishing Pads

PRODUCT FEATURES

SET
 

Polisher Machine x 1

5/6 inch Backing Plate x 1

5/6 inch Sponge Polishing Pad x 3

5/6 Wool Polishing Pad x 1

Car Washing Towel x 2

Car Washing Glove x 1

Polishing Disc Brush  x 1

Apron  x 1

Toolbox  x 1

SIZE
 

Length:16.53inch(420mm)

Height:4.72inch(120mm)

Ergonomic Design
 

The body is made of imported plastic, which allows the operator to use it more smoothly, while reducing the sense of vibration, practical design, low noise and low vibration.

Six Speed Adjustment
 

Adjustable speed from 1-6 gears, according to the speed selection of different working conditions, differentiated polishing is more efficient. Adjustable speed from 1-6 gears, according to the speed selection of different working conditions, differentiated polishing is more efficient. Prevent the polishing wax from splashing during startup.

1-2 Low speed grinding

3-4 Medium speed grinding

5-6 High speed polishing

Metal Shell
 

The cover is made of metal, the weight is scientific, and is conventionally polished. There is no need to apply pressure to hold the handrail.

Constant Speed
 

There is a comparison chart of gear speed on the fuselage, so that the operator can understand it immediately. The overall speed is from 160min to 480min, and the real-time speed regulation.The overall speed is from 160min to 480min, and the real-time speed regulation.

Fixed Switch
 

There is a square raised fixed switch on the side of the fuselage, which can be fixed in the open position, allowing the operator to operate more smoothly without being restricted by the switch.

Cooling Vent
 

Optimize the air circulation system to prevent dust from entering, the heat dissipation effect is good, and the power is protected from burnout. According to the frequency of use, it is necessary to clean the air inlet and outlet regularly, which helps to improve the service life of the machine.

Hook&Loop backing
 

Optimize the air circulation system to prevent dust from entering, the heat dissipation effect is good, and the power is protected from burnout. According to the frequency of use, it is necessary to clean the air inlet and outlet regularly, which helps to improve the service life of the machine.

1. According to your needs, choose the right accessories for polishing;
2. Before starting, please adjust the speed to a low speed to prevent the polishing agent on the polishing disc from splashing;

3. Please change the gear oil regularly and use special gear oil;
4. According to the frequency of use, please blow the motor inlet and outlet with compressed air one or more times a week;
5. Please check the rotation of the bearing regularly, and if it is found abnormal, please replace it in time;
6. The service life of the machine's carbon brush is about 300-600 working hours. If it is worn out, please replace it in time.

EU Plug (220V)
 

Suitable for: South Korea, Russia, Germany, Denmark, Belgium, Hungary, Spain Netherlands, Portugal, Austria, Norway, Poland, France, Finland, Sweden etc.

Note: If you need Australian plug or English plug, please let us know after placing the order, we can put an adapter for you.

US Plug (110V)
 

Suitable for: United States, Canada, Japan, Brazil, Taiwan(China), Philippines, Thailand.